Push Fit Plastic Fasteners

These are one of the best selling Honda equivalent clips. They are widely used across the Honda range as bumper clips, splashguard clips, side skir...

A very common expanding trim clip used by Ford, Vauxhall, Opel and Chrysler on a number of different vehicles. The clip is commonly used for the in...

Very widely used clip by Nissan. Common on most models and used on bumpers, arch linings, radiator grilles, engine shields, windscreen cowls etc. T...

This type of clip is normally used on larger exterior panels such as bumpers, side skirts and radiator grilles. They are extremely common on Toyota...

Extremely common Honda clip used on wheel arch linings and radiator grilles. The 8mm clip is a simple push rivet and replaces an 8mm screw rivet on...

These clips are used across the Land Rover range to attach side skirts, radiator grilles, bumpers, undertrays and wheel arch linings. The clips are...

These plastic rivets expand when the centre pin is pushed in. The clips are normally used for wheel arch linings but are also found on engine bay s...

This is probably the most common Mazda clip we sell. These are fitted to almost all modern Mazda cars produced since 2010. The clips fit into an 8m...

These 8mm plastic clips are extremely common on modern Kia cars. The clips is fitted throughout the vehicles. Examples include the clip being used ...

These are used on several Honda models to attach bumpers, side skirts, radiator grilles and underbody shields. The clips are a simple 10mm push fit...

These clips are widely used by Ford across their range of cars and vans. They are used on interior and exterior trim. Some vehicles use them for do...

These small, black 6mm clips have a wide collar and are common on interior trims and panels. They are often used on boot linings, upholstery, roof ...

This is a standard 6mm plastic rivet used for a number of purposes on many different BMW vehicles. They can be found used on interior trims and boo...

Widely used by Ford for wheel arch linings and bumpers, these are a strong 8mm push fit plastic rivet. The centre pin pushes in to expand the clip ...

This 8mm clip is very quick and easy to install and remove. They are often used for panels where access may be required such as wheel arch linings,...

These 8mm plastic rivets are used on some of the more modern Hyundai models such as the Santa Fe (2013 on). This type of clip is normally used to a...

These clips are a high quality replacement identical to the OE parts. Nissan use these plastic push fit rivets for a variety of uses. They can be f...

These clips are by far the most common clip we know of on Citroen cars and vans. It is fitted to at least 20 different models and is still in use o...

These 8mm push fit clips have a distinctive oval shaped head that pushes in to expand the pins and hold in place. The clips are used on some Ford m...

These 9mm push fit rivets are used on several Mitsubishi models including the Mitsubishi Lancer Evolution models 8, 9 and 10. They are used for att...

Widely used across the BMW range, these are very simple push pin plastic rivets that fit into an 8mm hole. BMW use them often on upholstery and car...

These 6mm trim clips are used rarely on Honda cars but are far more common on their motorcycles and ATVs. The clips are used for attaching fairings...

These are an extremely common plastic clip across the Vauxhall and Opel range. The clips are normally used on wheel arch linings / inner wing cover...

These clips push to fit and are easily released with a quarter turn of the head. For this reason they are often used for access panels around the e...

These clips have a metal spring loaded into the mechanism which helps to hold the clip firmly in place when they are fitted. The clips are very str...

A very widely used 5mm trim clip used by BMW on wheel arch flares, trims, linings and other various parts through the vehicle. They are a simple pu...

Common on several cars produced by Honda, these 8mm push fit clips are normally used to hold wheel arch linings and splashguards in place.

Used on a large number of Honda and Acura vehicles for attaching bumpers, side skirts, engine undertrays and splash shields. The clips fit into a 1...

Widely used across the Mercedes-Benz range of cars and vans, these are very simple push pin plastic rivets. They are fitted to Mercedes upholstery ...

These short clips are normally used for fastening bumpers, grilles, sill moulding trims and radiator covers in place. The clips have a mottled fini...

This is a very common clip used by Tesla throughout their vehicles. The clip fits into an 8mm hole and is used to secure parts such as bumpers, sil...

These are one of our best-selling Toyota clips. They are used on lots of different Toyota and Lexus models. Often used for engine bay shields, the ...

These are very widely used by BMW and are a simple push fit plastic rivet. When the centre pin is inserted, the clip expands and secures panels or ...

These are extremely common on most modern Honda cars. It's a standard 10mm push fit plastic rivet that is used to fasten larger trim panels and shi...

A standard push fit plastic rivet which fits into a 7.5mm hole. The wide 22mm collar means the part is suitable for many different uses. It is used...

These clips are very popular on a large range of Vauxhall cars and vans. The clips are normally used on exterior trims and shields such as bumpers,...

These clips are by far the most common clip we see on Peugeot vehicles. It is fitted to at least 16 different models and is still in use on their n...

These 6mm plastic trim clips are a perfect replacement for the Land Rover clips used to attach the plastic wheel arch flare or spat on the Defende...

Very widely used by BMW, these are also fitted to a few models of Mini. They are typically used on trims such as wheel arch flares but also on engi...

Small 6mm push fit clips used by Mitsubishi on a wide range of models. These are one of the most common Mitsubishi clips we stock and have been fit...

These heavy duty plastic rivets fit into an 8mm hole and are used by Ford on many of their cars and vans. The clips are used on a number of differe...

These 8mm plastic rivets are used on several modern Mitsubishi vehicles. The clips are a simple expanding push fit clip. The clip goes into an 8mm ...

This is common wheel arch lining, engine shield and side skirt clip used by Suzuki on models such as the Swift and Jimny. The clip fits into a 7mm ...

These tiny push fit plastic rivets are used on interior trims, bumpers, radiator grilles and for some shields on Toyota vehicles. They are also an ...

These simple plastic rivet clips are used on several different Audi models and across the Volkswagen range. They fit into an 8mm hole and are used ...

These 10mm push fit rivets are used on many different Nissan cars. Typical use is on bumpers, mudguards, side skirts or wheel arch linings.

These expanding plastic rivets fit into an 8mm hole. They are used on several Volvo models for attached the front bumper trims. Quick and easy to f...

These clips are a perfect fit for the standard holes in VW vans. They are longer than the original clips and so they allow for thicker panels to be...