Mitsubishi Car Trim Clips, Fixings & Fasteners

These 9mm push fit rivets are used on several Mitsubishi models including the Mitsubishi Lancer Evolution models 8, 9 and 10. They are used for att...

Small 6mm push fit clips used by Mitsubishi on a wide range of models. These are one of the most common Mitsubishi clips we stock and have been fit...

These 8mm plastic rivets are used on several modern Mitsubishi vehicles. The clips are a simple expanding push fit clip. The clip goes into an 8mm ...

Fitted to several Mitsubishi models, these clips are used for multiple purposes. They are found on wheel arch linings, bumpers, splashguards and in...

These are a very common clip used by a lot of different Japanese and European manufacturers. They fit into an 8mm hole and are used by Mitsubishi f...

These short blue moulding clips are used on interior and exterior trim panels. The clips are used on several different models for parts such as pil...

These small white plastic clips are a perfect replacement for several different Mitsubishi clips. The clips are used in many different places and c...

These are side skirt and body moulding clips fitted to a number of Mitsubishi cars. We always supply this clip with the foam sealing washer which i...

This interior trim panel clip is widely used by Japanese manufacturers including Mitsubishi. The clips are normally used on door cards but will als...

Mitsubishi bonnet insulation clips used to hold the fabric sound proofing panels in position on the underside of the bonnet. These clips fit into a...

These simple, push fit plastic rivets require no tools to fit. They simply expand to lock in position when the centre pin is inserted. These clips ...

These are very common on Mitsubishi cars and pick up trucks. The plastic spire-type clips are normally around the edges of the wheel arch lining wh...

These small white clips are widely used on Mitsubishi vehicles. They are used to attach trim panels or moulding strips. Example uses include L200 d...

These 8mm clips are common as wheel arch lining, engine bay and bumper clips. Our parts are all produced to the exact same specifications as the or...

Very widely used screw grommet that fits into a square hole measuring 8.5mm by 8.5mm. The clip is used by Mitsubishi to secure trim or parts to bod...

A standard 8mm push fit plastic rivet that is used on several models made by Mitsubishi. These plastic fasteners are used on arch linings, mudguard...

These small brown clips are used on lots of Mitsubishi models. The clip is normally used to attach the rubber seals that run along the front and re...

These small white clips have a canoe shaped head that fits inside a rubber door seal. The clip then clicks into position on the door frame to secur...

These small white trim panel clips are used on several Mitsubishi cars to secure small trim panels in position. Examples uses include Pajero or Sho...

These are used to mount the bumpers on several Mitsubishi models. This part fits into a hole in the metal bodywork and the plastic bumper cover is ...

Plastic screw fit rivets that expand when the centre pin is pushed or screwed in. This clip has a mottled patterned head and is used on several old...

These small fasteners clip into position to secure the radiator grille on some models of the Pajero, Shogun and L200. The clips are high quality af...

These plastic fasteners are used on many different Mitsubishi models from the Colt to the Pajero. They are normally white but occasionally blue or ...

These plastic clips are used to attach rubber weatherstrip seals around apertures on the vehicle. The large head of the clip fits into a hole in th...

These small plastic clips click into a 5mm diameter hole. The clips are used to secure lightweight parts such as air intake hoses, engine bay shiel...

These clips are normally blue or green. Both colours are the same size and specification. We stock them in blue but they are not visible when fitte...

Standard lock nuts or screw grommets used for mounting parts or trim to metal bodywork. These clips push into a square 8.5mm hole in the bodywork. ...

These distinctive expanding plastic rivets fit into a square hole measuring 9mm x 9mm. The centre pin of the clip has a cross head and the clip is ...

The small 6mm fasteners are suitable for securing lightweight trim covers. Mitsubishi use these clips on some of their vehicles to secure the winds...

A simple 7mm push fit used on different types of trim panel and mouldings by Mitsubishi.

This is a standard 8mm push fit plastic rivet very widely used by Mitsubishi across it's entire range and for a number of different purposes. The c...

These small black plastic trim clips are used on some Mitsubishi models to attach the plastic cowling that runs along the bottom of the windscreen.

These long plastic grommets are used to attach parts and trims to the metal bodywork on some Mitsubishi models. They are used on several models nor...

Use on several Mitsubishi cars and vans, these are very simple push pin plastic rivets that fit into an 8mm hole. They are normally found on uphols...

These blue interior trim panel clips are used by several Japanese car manufacturers. This clip is used by Mitsubishi to secure interior trim panels...

These unusual clips are used by Mitsubishi to attach exterior trim panels to the side of the Shogun / Pajero from 2000-2006. Our clips are high qua...

Each of these clips includes a foam sealing washer. The parts are identical in specification and standard to the genuine Mitsubishi parts. These cl...

Widely used across the Mitsubishi range, this clip is used for a variety of different purposes. The clip is often on door cards, boot linings and o...

These simple, black button clips fit into an 8mm diameter hole. The part is used by Mitsubishi to attach insulation and upholstery panels in severa...

These are short fasteners used by Mitsubishi to attach exterior side mouldings, wheel arch trims and interior trim panels. There are a few differen...