Contact Us
Mazda CX-3 Fixings Trim Clips and Fasteners -Mk1 (2016 on)
Below you can find a list of some of the trim clips and fasteners that we keep in stock for the Mazda CX-3 Mk1 (2016 on). We have tried to list the parts under subheadings which indicate the location they are used. Please note that there may be other clips used which we do not stock and which are not shown. If you need something specific for your CX-3 and you can't find it, just let us know and we'll try to help or suggest an alternative.
Search by Vehicle
Liquid error (sections/static-collection-grouped line 160): Could not find asset snippets/easysearch.liquid
Bonnet Insulation and Soundproofing
-
Mazda Bonnet Insulation & Soundproofing Clips, Mazda TD1156694
These fir tree clips are used to secure the under bonnet sound proofing insulation on most Mazda cars since around 2003. The clips fit in a 5.5mm h...
View full details
Dashboard and Fascia Trim
-
Interior Trim Panels and Covers Clips, Mazda S47P64345
This part is normally used on interior panels that sit flush against the dashboard or centre console. These trims are sometimes decorative or are u...
View full details
Front Bumper and Trim Fastener
-
8mm Push Fit Bumper, Arch Lining & Undertray Clip, Mazda B45A56146A
This is probably the most common Mazda clip we sell. These are fitted to almost all modern Mazda cars produced since 2010. The clips fit into an 8m...
View full details -
Plastic Bumper Clips for Mazda Cars- Front, Rear Bumper Trim & Grille Rivet- GD7A50EA1
Common on several Mazda models, these clips are normally used on bumpers undertrays, sill mouldings or other large panels and shields.
-
8mm Push Fit Plastic Rivet, Mazda BGV4-56-145
Very common across the Mazda range, this clip is used to fasten and secure a wide variety of parts. Uses include Mazda MX-5 sideskirt clips, CX-3 b...
View full details -
Screw Mount Clips for Bumpers & Undertrays, Mazda C27450133
These grey screw edge grommets or spire clips are used to join parts without necessitating damage to the metal bodywork. This part slides over the ...
View full details -
8mm Push Fit Plastic Rivet Bumper Clip, Mazda FD0168AC3
These long grey expanding push fit clips are unusual in that they only expand at the very tip. They are used by Mazda on front bumpers and some doo...
View full details
Front Door Card
-
6mm Interior Trim Fastener Clips for Trim Panels, Fascias & Linings Mazda- B46768AC3
These small, black 6mm clips have a wide collar and are common on interior trims and panels. They are often used on boot linings, upholstery, roof ...
View full details -
Interior Door Card & Trim Panel Clips, Mazda GJ6R68ABX / GJ6A68AB1
These interior door card clips are used on a wide range of Mazda cars to hold the interior door cards in place. Our clips include the foam sealing ...
View full details -
Interior Trim Panels and Covers Clips, Mazda S47P64345
This part is normally used on interior panels that sit flush against the dashboard or centre console. These trims are sometimes decorative or are u...
View full details
Front Door Weatherstrip
-
Yellow Rubber Door Seal & Weatherstrip Clips, Mazda BC1D58762
These yellow weatherstrip clips are fitted to most Mazda cars since 2000. The small clips fit inside the rubber seals that run around the doors, bo...
View full details
Front Grille or Slam Panel
-
Plastic Bumper Clips for Mazda Cars- Front, Rear Bumper Trim & Grille Rivet- GD7A50EA1
Common on several Mazda models, these clips are normally used on bumpers undertrays, sill mouldings or other large panels and shields.
Front Wheel Arch Flare and Trim Moulding
-
Side Moulding & Wheel Arch Flare Clips, Mazda KD5151W24
Each of these fasteners includes a foam sealing washer. Example uses include Mazda CX-3 and CX-5 wheel arch flare and side moulding clips. The clip...
View full details -
Wheel Arch Flare Trim & Moulding Clips, Mazda KD5351W24
Grey plastic fasteners used by Mazda to attach the plastic trim that runs around the edge of the wheel arch. This clip is used on the Mazda CX-3 Mk...
View full details
Front Wheel Arch Lining and Mudguard
-
8mm Push Fit Bumper, Arch Lining & Undertray Clip, Mazda B45A56146A
This is probably the most common Mazda clip we sell. These are fitted to almost all modern Mazda cars produced since 2010. The clips fit into an 8m...
View full details
Interior Pillar Trim
-
Mazda Door Card & Interior Panel Trim Clips- GE4T68865A
This interior trim panel clip is widely used by Mazda. The clips are normally used on door cards but will also be found on boot linings, pillar tri...
View full details -
Interior Trim Panels and Covers Clips, Mazda S47P64345
This part is normally used on interior panels that sit flush against the dashboard or centre console. These trims are sometimes decorative or are u...
View full details
Rear Bumper and Trim Fastener
-
8mm Push Fit Bumper, Arch Lining & Undertray Clip, Mazda B45A56146A
This is probably the most common Mazda clip we sell. These are fitted to almost all modern Mazda cars produced since 2010. The clips fit into an 8m...
View full details -
8mm Push Fit Plastic Rivet, Mazda BGV4-56-145
Very common across the Mazda range, this clip is used to fasten and secure a wide variety of parts. Uses include Mazda MX-5 sideskirt clips, CX-3 b...
View full details
Rear Door Card
-
Interior Door Card & Trim Panel Clips, Mazda GJ6R68ABX / GJ6A68AB1
These interior door card clips are used on a wide range of Mazda cars to hold the interior door cards in place. Our clips include the foam sealing ...
View full details
Rear Door Weatherstrip
-
Yellow Rubber Door Seal & Weatherstrip Clips, Mazda BC1D58762
These yellow weatherstrip clips are fitted to most Mazda cars since 2000. The small clips fit inside the rubber seals that run around the doors, bo...
View full details
Rear Wheel Arch Flares and Moulding Trim
-
Side Moulding & Wheel Arch Flare Clips, Mazda KD5151W24
Each of these fasteners includes a foam sealing washer. Example uses include Mazda CX-3 and CX-5 wheel arch flare and side moulding clips. The clip...
View full details -
Wheel Arch Flare Trim & Moulding Clips, Mazda KD5351W24
Grey plastic fasteners used by Mazda to attach the plastic trim that runs around the edge of the wheel arch. This clip is used on the Mazda CX-3 Mk...
View full details
Rear Wheel Arch Lining and Mudguard
-
8mm Push Fit Bumper, Arch Lining & Undertray Clip, Mazda B45A56146A
This is probably the most common Mazda clip we sell. These are fitted to almost all modern Mazda cars produced since 2010. The clips fit into an 8m...
View full details -
8mm Push Fit Plastic Rivet, Mazda BGV4-56-145
Very common across the Mazda range, this clip is used to fasten and secure a wide variety of parts. Uses include Mazda MX-5 sideskirt clips, CX-3 b...
View full details
Side Body Moulding Strip Trim
-
Side Moulding & Wheel Arch Flare Clips, Mazda KD5151W24
Each of these fasteners includes a foam sealing washer. Example uses include Mazda CX-3 and CX-5 wheel arch flare and side moulding clips. The clip...
View full details
Side Skirt, Sill Moulding Cover Trim
-
Plastic Trim Clips for Mazda Side Skirts Sill Moulding- BP4L51SJ3
These chunky and strong clips and used on the sills of several different Mazda models. The clips are used to fasten the side skirts or plastic sill...
View full details -
Mazda Side Skirt & Sill Moulding Clips - D10E51SJ3
These green plastic moulding clips come with foam sealing washers. They are an identical and high quality alternative to the genuine Mazda part num...
View full details -
Door Moulding, Wheel Arch Trim & Sill Cover Clips- Mazda TD1251SJ3A
Grey plastic trim clips with a foam sealing washer. The plastic fasteners are used on several Mazda models. They are in different places depending ...
View full details
Tailgate Lining Clips and Boot Lid Lining
-
6mm Interior Trim Fastener Clips for Trim Panels, Fascias & Linings Mazda- B46768AC3
These small, black 6mm clips have a wide collar and are common on interior trims and panels. They are often used on boot linings, upholstery, roof ...
View full details -
Interior Trim Panels and Covers Clips, Mazda S47P64345
This part is normally used on interior panels that sit flush against the dashboard or centre console. These trims are sometimes decorative or are u...
View full details -
Tailgate Lining & Interior Trim Clips, Mazda KD4568865
These green plastic clips look different before they are fitted as they have a washer that forms part of the mould. During installation, the washer...
View full details
Underbody Shields and Insulation Panel Fastener
-
8mm Push Fit Bumper, Arch Lining & Undertray Clip, Mazda B45A56146A
This is probably the most common Mazda clip we sell. These are fitted to almost all modern Mazda cars produced since 2010. The clips fit into an 8m...
View full details -
Plastic Bumper Clips for Mazda Cars- Front, Rear Bumper Trim & Grille Rivet- GD7A50EA1
Common on several Mazda models, these clips are normally used on bumpers undertrays, sill mouldings or other large panels and shields.
-
8mm Push Fit Plastic Rivet, Mazda BGV4-56-145
Very common across the Mazda range, this clip is used to fasten and secure a wide variety of parts. Uses include Mazda MX-5 sideskirt clips, CX-3 b...
View full details -
Screw Mount Clips for Bumpers & Undertrays, Mazda C27450133
These grey screw edge grommets or spire clips are used to join parts without necessitating damage to the metal bodywork. This part slides over the ...
View full details
Windscreen Cowl or Scuttle Panel
-
8mm Push Fit Plastic Rivet, Mazda BGV4-56-145
Very common across the Mazda range, this clip is used to fasten and secure a wide variety of parts. Uses include Mazda MX-5 sideskirt clips, CX-3 b...
View full details